Sony handycam dcr-trv103 manual

I could go on and on but that's about all I have time for. These older digital video cameras are great!!! If you can get your hands on one of these, go for it.

I am a professional freelance videographer and use this camera on less important events. I already have 3 of them and all bought at Ebay at a price that can't be beat. This camera is in very good condition and meet all of my needs. Verified purchase: Yes Condition: Pre-owned. Skip to main content. About this product.

Make an offer:. Stock photo. Pre-owned: Lowest price The lowest-priced item that has been used or worn previously. Buy It Now. Add to cart. Make Offer. This camcorder includes everything shown in the pictures. It includes the camcorder itself, the original box, accessories, charger, and original papers.

This bundle does not include a battery. The camcorder has been tested for power only. See images for condition. Sold as is. Sold by nathalapra0 About this product Product Information This Sony Digital Handycam makes it possible for you to take videos virtually anywhere, so you never miss a memory.

The Digital8 format provides outstanding quality video, with up to lines of horizontal resolution, and also produces digital stereo audio. This minicam has a NightShot system with infrared so you can shoot in total darkness. It has picture stablilization, so your video remains steady, and a LaserLink Wireless Transmitter with a television control means you can watch your video on your television without hooking up wires. Additional Product Features Screen Details. Show More Show Less.

Bundles that include this product. Ratings and Reviews Write a review. Most relevant reviews See all 24 reviews. Great product The camera was in great condition and is what I needed to replay tapes that I had filmed many years ago. I have owned this product in the past, years ago, and all the features are very good for my needs. Best Selling in Camcorders See all.

You may also like. These spots occur normaiiy in the manufacturing process and do not affect the recorded picture in any way. Effective number of pixeis is Keep your camcorder away from rain and sea water. Letting your camcorder get wet may cause your camcorder to malfunchon.

Sometimes this malfunction caimot be repaired [a]. The inside of the viewfinder or LCD screen may be damaged [c]. Contents of the recording cannot be compensated if recording or playback is not made due to a malfunction of the camcorder, video tape, etc. Do not carry your camcorder by holding the battery pack. If you do so, the battery pack may slide off your camcorder unintentionally, damaging your camcorder. Charging begins.

The remaining battery time is indicated in minutes on the display window. When the remaining battery indicator changes to W, normal charge is completed. To fully charge the battery full charge , leave the battery pack attached for about 1 hour after normal charge is completed until FULL appears in the display window. Fully charging the battery allows you to use the battery longer than usual.

Prevent metallic objects from coming into contact with the metal parts of the DC plug of the AC power adaptor. This may cause a short-circuit, damaging the AC power adaptor. The remaining battery time indicator in the display window roughly indicates the recording time with the viewfinder. Numbers in parentheses " " indicate the time using a normally charged battery. The battery life will be shorter if you use your camcorder in a cold environment. The actual battery life may be shorter.

The battery life will be shorter if you use your camcorder in a cold enviromnent. The indicator may not be correct, depending on the conditions in which you are recording. When you close the LCD panel and open it again, it takes about 1 minute for the correct remaining battery time to be displayed.

When you use your camcorder for a long time, we recommend that you power it from a wall outlet using the AC power adaptor. The set is not disconnected from the AC power source house current as long as it is connected to the wall outlet, even if the set itself has been turned off. This means that the battery pack cannot supply any power if the power cord is cormected to the DC IN jack, even when the power cord is not plugged into a wall outlet.

If you use standard 8 B tape, be sure to play back the tape on this camcorder. Your camcorder records in the DigitalS B system. The cassette compartment automatically lifts up and opens. The cassette compartment automatically goes down. Mosaic pattern noise may appear when you play back standard 8 tape on other VCRs.

Doing so may cause malfunction. See "Step 1" and "Step 2" for more information p. The viewfinder automatically turns off. The "REC" indicator appears. The camera recording lamp located on the front of your camcorder lights up. The recording lamp lights up in the viewfinder when you record with the viewfinder. Fasten the grip strap firmly. Do not touch the built-in microphone during recording. You can make the trajaaition between the last scene you recorded and the next scene smooth as long as you do not eject the cassette.

Your camcorder automatically turns off. This is to save battery power and to prevent battery and tape wear. The LCD panel moves about 90 degrees to the viewfinder side and about degrees to the lens side. When closing the LCD panel, set it vertically until it clicks, and swing it into the camcorder body. When using the LCD screen except in the mirror mode, the viewfinder automatically turns off.

The LCD screen may be difficult to see. If this happens, we recommend that you use the viewfinder. The picture on the LCD is a mirror-image. However, the picture will be normal when recorded. Some of the other indicators appear mirror-reversed and others are not displayed. If you record pictures with the LCD panel closed, check the picture with the viewfinder.

Adjust the viewfinder lens to your eyesight so that the indicators in the viewfinder come into sharp focus. Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom function sparingly results in better-looking recordings. The digital zoom function is set OFF at the factory p. If you cannot get a sharp focus, move the power zoom lever to the "W" side until the focus is sharp.

Otherwise the digital zoom activates without notice p. Use this mode to avoid recording unnecessary scenes. To extend. The time code indicates the recording or playback time, "" hours:minutes:. When you shoot a subject with the light source behind the subject or a subject with a light background, use the backlight function.

The NightShot function enables you to shoot a subject in a dark place. For example, you' can satisfactorily record the environment of nocturnal animals for observation when you use this function. The indicator changes as follows:. The picture will be clearer with the NightShot Light on.

To enable NightShot Light, set N. This may cause your camcorder to malfunction. NightShot Light rays are infrared and so are invisible. The last 5 seconds of fhe recorded section are played back and playback stops. You can monitor the sound from the speaker or headphones. The jecorded section is played back.

You cannot monitor the sound. The last few seconds of the recorded section are played back. You can monitor the playback picture on the LCD screen or in the viewfinder.

You can control playback using the Remote Commander supplied with your camcorder. You can turn the LCD panel over and move it back to the camcorder body with the. LCD screen facing ouf [a].

The data code function works only for tapes recorded in the DigitalS if system. Recording data is your camcorder's information when you have recorded.

In the recording mode, the recording data will not be displayed. To resume normal playback, release the button. Press x2 on the Remote Commander during playback. The last 5 seconds of the recorded section plays back and stops. To resume playback, press. You can operate the playback control buttons in the same way as when you monitor playback pictures on the LCD screen. When monitoring the playback picture on the TV screen, we recommend that you power your camcorder from a wall outlet using the AC power adaptor p.

Open the jack cover. Connect the yellow plug for video and the white plug for audio on both your camcorder and the TV or the VCR you do not connect the red plug. With an RFU adaptor, the sound is monaural. Connect using an S video cable not supplied to obtain high-quality pictures.

For details, refer to the operating instructions of the AV cordless IR receiver. With some models, however, the picture and sound may be disconnected momentarily when the video input is. You can record a still picture like a photograph. This mode is useful when you want to record a picture such as a photograph or when you print a picture using a video printer not supplied. Recording does not start yet. The still picture in the viewfinder or on the LCD screen is recorded for about seven seconds.

The sound during those seven seconds is also recorded. During recording, the image you are shooting appears in the viewfinder or on the LCD screen. The picture may fluctuate. Your camcorder record a picture on the LCD screen or in the viewfinder immediately.

The still picture is then recorded for about seven seconds and your camcorderVeturns to the standby mode. You cannot select another still picture. Welcome to ManualMachine. We have sent a verification link to to complete your registration.