Hayter harrier 56 lawn mower manual

Page Safety Symbols Wear strong work gloves when removing and reassembling the cut- terblade. Always replace worn or faulty parts with genuine Hayter parts. Safety Symbols Safety Alert - Be aware to the Danger of severing toes or fin- Danger of being hit by thrown possibility of injury.

If any items are missing contact, your local Hayter dealer. Engine Handbook. Charger 2. Ignition Key To prevent accidents cut off the long ribbon attached to the grass- bag and discard.

The engine must be filled with the correct grade of oil and petrol before starting the engine. Never use additives with recommended oil. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Turn the ignition key in a clockwise direction and hold in position to crank the engine. When the engine starts release the key and move the throttle to the fast position after starting a cold engine. Height of Cut To adjust the height of cut: Grip the lever and pull sideways to dis- engage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut.

CS Heavy Growth Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grassbag at the maximum height of cut setting.

January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture.

September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. First 5Hrs After the very first five hours change the engine oil Daily Page 1. Page Spark Plug Service The internal cool- ing fins and surfaces may require cleaning to prevent overheating and engine damage.

We recommended that this service be carried out by an authorised Hayter Service dealer. Grassbag Remove grass debris from the grassbag immediately after use and check its condition for signs of damage.

Fertilisers and top dressings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treat- ed grass and store well away from corrosive materials.

Page Lubrication DO NOT rotate tools towards the cut- ting edges to avoid the risk of injury should the tool slip. The condition of the cutterblade and its mounting arrangement should be checked regularly for signs of wear or damage. Ensure that the cut- terblade is not bent or cracked.

Take care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being dam- aged through contact with the engine. Operate engine stop lever. Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Battery discharged Only Charge battery Engine smokes Excess oil level. Tighten bolts Cutterblade bolt loose. Tighten bolt Cutterblade out of balance.

Balance cutterblade Bent crankshaft. Consult your dealer Uneven cut Undulating ground conditions Change direction of travel Cutterblade worn Sharpen the cutterblade Cutterblade out of balance Balance the cutterblade This manual is also suitable for: d d.

Before use, always visually inspect the cutting mechanism to ensure that it in good condition. A damaged cutterblade must be replaced immediately with a genuine Hayter replacement part. Do not operate the engine in a confined space where exhaust fumes carbon monoxide can collect. Refuel outdoors only and do not smoke while refuelling. Always pull the starter cord slowly until resistance is felt.

Then pull the cord rapidly to avoid kickback and prevent hand or arm injury. Never operate the mower unless the guards are securely in position and in good condition. Never store the mower with petrol in the tank within an enclosed area where fumes may reach an open flame or spark. Allow the engine to cool before storing fire hazard, keep the engine and the grass, leaves, or excessive grease.

The grassbag is supplied in a partially assembled condition. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Hayter Mowers. Spark Plug Lead. Engine Cover. Air Cleaner. Fuel Filler Cap. Oil Filler Cap and Dipstick.

Serial No. Handlebar Securing Knob. Engine Start-Grip. BBC Control Lever. Variable Speed Control see note Grassbag Assembly. Grassbag Cover. Height of Cut Adjuster 1 Exhaust Guard 16 17 18 TH01A 19 Note: Item 14 should only be operated whilst the engine is running or the cable will be damaged.

Check the rear deflector and grassbag Replace worn or damaged parts for safety If the fuel tank has to be drained, this when the engine is cool. Wear strong work gloves when removing terblade. Always replace worn or faulty parts with Safety Symbols. Safety Alert - Be aware to the possibility of injury.

Stop engine and remove spark the plug lead before working on the mower. You can only view or download manuals with. Sign Up and get 5 for free. Upload your files to the site. You get 1 for each file you add. Get 1 for every time someone downloads your manual. Buy as many as you need.

View and download manuals available only for. Register and get 5 for free.